Computer Extension
: the CAT5-7000/CAT5-7500
Operate Dual-Display and Varied Peripherals Remotely
Full Multimedia Functionality Provided at Extended Distances
This hard-working dual-display ex tension solution comes in two
versions that each allow multiple analog video, audio, control and
support peripheral devices to be operated at any distance up to
330-feet (100-meters) from the computer. What differentiates the
two is the video extension technique used and the amount of cabling
needed for extension.
CAT5-7000 – Multipurpose and Flexible
The CAT5-7000 is built to extend two analog monitors, one USB-equipped
computer peripheral (such as a scanner or printer), one PS/2-based
keyboard/mouse, two audio outputs (for two sets of speakers, for
example), one audio input (for microphone or similar audio device)
and one RS-232 device (like a touchscreen). Plus, using Extreme
USB technology, the CAT5-7000 can support a 4-port USB hub in the
case that multiple USB-based computer devices need to be operated
at the extended location.
For multimedia, graphics and a/v production professionals as well
as gamers and dual-display fans, this is the flexible and reliable
way to ensure you and your equipment can function ideally at any
remote location.
CAT5-7500 – Additional Video Refinement
The CAT5-7500 operates just like the CAT5-7000 but it sends video
separately using its own CAT5 cable. This means it requires an additional
CAT5 extension cable but it also enables video refinement capabilities
for the extended monitors. Both video signals can also be extended
a few hundred feet further (up to 600-feet) if needed. The CAT5-7500
is the over-and-above solution for those who need the industrious
CAT5-7000 and have more discerning video requirements.
Compatibility
Designed to offer unprecedented flexibility with computer peripherals,
both versions work with all CRT and LCD computer monitors, USB peripherals,
PS/2 keyboards and mice, RS-232 and audio devices (Mac or PC).
How it Works
Both versions use a sender and receiver methodology to transmit
signals from the computer to the workstation. The sender unit connects
to the computer using the cables provided. The receiver unit connects
to the two monitors, keyboard/mouse, USB, RS232 and audio devices
up to 330-feet away. Multiple CAT5 extension cables (up to 4 for
the CAT5-7000; up to 5 for the CAT5-7500), sold separately, connect
the sender to the receiver and thus the computer to the extended
workstation. Both the sender and the receiver units must be connected
to a power supply. When fully powered and operational, the units
extend all signals efficiently and reliably.
Package Includes:
Sender Unit
Receiver Unit
Two 6ft VGA cables
One 6ft USB cable
Two 6ft PS/2 cables
One 6ft Audio cable
Two 5V Transformers
Features:
• Saves space—no need to make room for large or small
CPUs at the workstation when both the CAT5-7000 and the CAT5-7500
provide convenient and flexible ways to isolate the CPU and expand
the workstation
• Increased productivity—a remote computer workstation
allows computer data to be input and accessed on-site in real-time
• Improved aesthetics—both the CAT5-7000 and the CAT5-7500
eliminate computer noise where you work
• Flexible functionality—both models maintain high resolution
video, support two types of analog monitors (CRT and LCD), DDC control
signals, USB and RS-232 peripherals
• High Performance Technology—both models use Extreme
USB technology for USB extension, ensuring control signals operate
optimally and will support high-powered 4-port USB hubs, if needed
• Multimedia Enabled—two audio outputs are extended
for multimedia applications
• Ease of use—both models install in seconds and are
rack-mountable
Specifications:
• Video Amplifier Bandwidth: 350 MHz
• Actual Bandwidth: 120 MHz
• Input Video Signal: 1.2 Volts p-p
• Input Sync Signal: 5 Volts p-p (TTL)
• Horizontal Frequency Range: 15-70 KHz
• Vertical Frequency Range: 30 - 170 Hz
• Video In: HD-15
• Focus/Brightness Control: 25 to 450 FT
• Video out:HD-15
• Link Connector: RJ-45
• ADB Keyboard Connectors: 4 Pin MiniDin
• PS/2 Keyboard Connectors: 6 Pin MiniDin
• USB - "A" Connector: USB Input
• USB - "B" Connector: USB Device Input
• Power Supply: 16 VAC 2A
• Power Consumption: 15 Watts (max.)
• Dimensions: 16"W x 1 3/4"H x 4"D
• Shipping Weight: 14lbs.
* NOTE: If you use a patch panel or patchcords both the cables
and the patch have to be shielded. |
