| The M1-2R2-TR is designed to enable the DDC/HDCP parameter control and power management interconnection over a RJ-45C UTP copper cable with digital data gigabit over two duplex LC patch cored fibers up to 100m. For the extension over 100m, disconnecting the RJ-45C UTP cable, we customize to program the EDID (Extended Display Interface Data) parameters in an EPROM inside the transmitting module to specify user' displays complied with VESA. It enables graphic cards to virtually talk with displays at start-up, so which Opticis calls as vDDC (virtual DDC).
It supports up to UXGA(1,600 x 1,200) resolution at 60Hz refresh rate with 1 pixel/clock mode. |
Features:
Extend digital graphic/video signals as follows
- M1-2R2-TR having DDC/HDCP interconnection over the coaxial cabel: 100 Meter
- M1-21y-TR using vDDC for VESA EDID parameter control programmed in the Tx housing: 500 Meter
Comply with FDA/CDRH and IEC 60825-1 Class 1 Laser Eye Safty
Verified in Class A, the industry standard bei FCC or CE.
Comply with DVI 1.0 standard an DDC Connection supports DDC2B mode
Adopts only an external power supply, +12V to supply both modules over DDC cable (Only M1-2R2-TR). For M1-21y-TR model, not using any DDC cable, you might require an additional power, optionally.
No require S/W driver to install, just plug and play
User 850nm multimode light sources and equivalent photo detectors, so recommend 2 Duplex LC Pathc cord multimode GOF or breachout GOF.
Adopt 2 Duplex LC receptacles on the side-face of modules.
Aplications:
Digital FPDs, PDPs and projektors for medical appliances, aero, traffic control, factory, and bank
Digital FPDs and projekctors in converence room an auditorium
Kios with digital FPDs showing full motion graphic displays form remote systems
PDP displays for information in public Sites
LED signboards in street and in stadiums
|
